The Ventilator comes with:
The Getinge Maquet Servo-U is a ventilator that is intended for intensive care. The Servo-U gives the medical professional more ways to tailor each ventilation treatment to each patient while still protecting the integrity of their lungs. these phases of ventilation include controlled, supported,
The Ventilator comes with:
The Getinge Maquet Servo-U is a ventilator that is intended for intensive care. The Servo-U gives the medical professional more ways to tailor each ventilation treatment to each patient while still protecting the integrity of their lungs. these phases of ventilation include controlled, supported, non-invasive, and spontaneous breathing. With a larger touchscreen display, it is easy to view and adjust the patient’s parameters. The Display screen can be rotated 360 degrees so it can be read no matter what side of the patient’s bed it is put on.
Ventilation Modes:
Why Maquet Servo U ventilator
It features unique decision support tools such as Transpulmonary pressure, Open Lung Tool, Servo Compass®, Stress Index, and Edi – the electrical activity of the diaphragm. Crucially, it also comes with our unique NAVA ventilation mode. In other words, an all-in-one solution where there’s no need to switch ventilators or devices.
The unit Powers On and completes the Self Test
The unit is in Excellent Condition.
Our team of product experts ensures that each system is in excellent condition and functioning properly
Contact us today to learn more and get a personalized estimate for your needs.
Don't hesitate to ask any questions - we are here to help you make the most informed decision for your medical practice.
The Ventilator comes with:
Servo-i delivers a high level of clinical performance for a variety of situations and for all patients. This helps clinicians provide cost-effective care throughout the hospital.
Servo ventilators equipped with NAVA can display your patient's diaphragm activity on screen, so you can improve patie
The Ventilator comes with:
Servo-i delivers a high level of clinical performance for a variety of situations and for all patients. This helps clinicians provide cost-effective care throughout the hospital.
Servo ventilators equipped with NAVA can display your patient's diaphragm activity on screen, so you can improve patient-ventilator synchrony and comfort. This can lead to reduced need for sedation, fewer complications and shorter weaning periods.
Basic configurations are available:
Key Features:
Why Siemens/Maquet Servo I ventilator
SERVO-i is a single system offering a broad range of treatment options, which means it is always ready to adapt to your changing clinical needs. Up-time is maximized thanks to the following features:
The unit Powers On and completes the Self Test
The unit is in Excellent Condition.
Our team of product experts ensures that each system is in excellent condition and functioning properly
Contact us today to learn more and get a personalized estimate for your needs.
Don't hesitate to ask any questions - we are here to help you make the most informed decision for your medical practice.
Aeonmed VG70 Ventilator on Stand
The VG70 is a comprehensive transportable ICU ventilator including lung protective ventilation modes such as BIVENT and PRVC. The VG70 has flexible configuration allowing for trolley, bed or ceiling pendant mount. As a cost-effective solution, the VG70 ha
Aeonmed VG70 Ventilator on Stand
The VG70 is a comprehensive transportable ICU ventilator including lung protective ventilation modes such as BIVENT and PRVC. The VG70 has flexible configuration allowing for trolley, bed or ceiling pendant mount. As a cost-effective solution, the VG70 has a metal based autoclavable exhalation valve with a non- consumable design built in flow sensor and its ventilation software is upgradeable with the available USB port. The VG70's optimal ventilator synchrony leads to greater patient comfort; the Leak compensation system precisely controls the tidal volume of each breath delivered to the patient by adjusting compensation dosage automatically.
Ventilation Modes:
Why Aeonmed VG70 ventilator
Critical care ventilator suitable for intra-hospital transport and sub-acute care of infants, children and adults. The VG70 combines the advantages of a flexible non-invasive ventilator with a full-featured invasive ventilator. It has comprehensive functionality and a user-friendly design.
The unit Powers On and completes the Self Test
The unit is in Excellent Condition.
Our team of product experts ensures that each system is in excellent condition and functioning properly
Contact us today to learn more and get a personalized estimate for your needs.
Don't hesitate to ask any questions - we are here to help you make the most informed decision for your medical practice.
The Unit includes the following:
The ventilator is designed for use on patients up to 20kg, in conventional ventilation. In high frequency oscillation ventilation up to 20kg, dependent on lung condition. (SLE5000 only).
The touch screen is working fine with function menus and parameters settings accessible.
Exhalation valve
The Unit includes the following:
The ventilator is designed for use on patients up to 20kg, in conventional ventilation. In high frequency oscillation ventilation up to 20kg, dependent on lung condition. (SLE5000 only).
The touch screen is working fine with function menus and parameters settings accessible.
Exhalation valve was included.
Constant alarm was on with "Leaking Fresh Gas" displayed
When using the ventilator with Nitric Oxide therapy devices, two N4110 filters are required to scavenge all the waste Nitric Oxide. See "Nitric Oxide Therapy" on.
Basic configurations are available:
New Features & Unique Interface:
Ventilation Modes:
CPAP: (Continuous Positive Airway Pressure)
The ventilator generates a continuous positive airway pressure at a level set by the User. The apnea alarm will sound if the patient has not made any breath attempts within the Stepanova period.
CMV: (Continuous Mandatory Ventilation)
In this mode the inspiratory cycle is initiated by the ventilator at a set BPM rate. The breaths can be either time limited and pressure cycled or flow cycled and pressure limited.
PTV: (Patient Triggered Ventilation)
In this mode all the patient's breath attempts are pressure supported. Mechanical breaths are delivered at the set parameters (Ti, PEEP and PIP) if no patient effort is recognized. This mode can be used with or without a flow sensor.
PSV: (Pressure Supported Ventilation)
This is a pressure limited mode of ventilation in which each breath is patient triggered and upported. The breath is patient triggered, pressure supported and patient terminated. The infant therefore has control of the whole cycle, i.e. the inspiratory time, frequency and minute volume. This form of ventilation is dependent on the use of a flow sensor placed between the ET tube connector and the patient circuit. Changes in flow or volume signal detects spontaneous breathing.
SIMV: (Synchronized Intermittent Mandatory Ventilation)
The frequency of mandatory breaths is determined by the BPM control. When a mandatory breath is due an assist window opens and waits for a patient's inspiratory effort. When this occurs the ventilator delivers a synchronized breath (SIMV breaths). Once the breath has been delivered the assist window closes until the next set breath is due.
SIMV with PSV
SIMV with PSV allows the user to select the termination sensitivity and pressure support level on non SIMV breaths. Once a mechanical breath is delivered to the patient, the flow to the infant rapidly peaks and then decelerates to the termination threshold, inspiration end sand expiration can begin. The following parameters must be selected: PEEP, PIP, Ti, Breath detection level, Termination sensitivity level, Backup BPM, Apnea delay time,
TTV: (Targeted Tidal Volume)
The aim of TTV is to prevent over distension of the alveoli and thereby limit Vol trauma. By targeting a selected tidal volume, and achieving and maintaining the tidal volume with pressure ventilation, also limits barotrauma. Targeted tidal volume can be applied to all modes of pressure cycled ventilation, provided that a flow sensor is in situ.
TTV cannot be applied in HFO or HFO+CMV.
HFO: (SLE5000 only)
High Frequency Oscillation In this mode, the ventilator shall deliver continuous high frequency oscillation. There is no patient interaction.
Our team of product experts ensures that each system is in excellent condition and functioning properly
Contact us today to learn more and get a personalized estimate for your needs.
Don't hesitate to ask any questions - we are here to help you make the most informed decision for your medical practice.
The HAMILTON-G5 is Hamilton Medical’s most modular high-end mechanical ventilator. A large set of standard features and options allows you to tailor the HAMILTON-G5 to your needs. The integrated cuff pressure controller IntelliCuff® continuously monitors and maintains a set cuff pressure in real-time. The Protective Ventilation Tool (P
The HAMILTON-G5 is Hamilton Medical’s most modular high-end mechanical ventilator. A large set of standard features and options allows you to tailor the HAMILTON-G5 to your needs. The integrated cuff pressure controller IntelliCuff® continuously monitors and maintains a set cuff pressure in real-time. The Protective Ventilation Tool (P/V Tool Pro) provides a repeatable method to assess recruitability and find the best PEEP based on respiratory mechanics, as well as providing an easy and repeatable method for performing recruitment maneuvers. The HAMILTONG5 also supports transpulmonary pressure measurement.
Ventilation Modes:
Why Hamilton G5 ventilator
The Hamilton offers everything from high-flow oxygen therapy, invasive ventilation options, and Adaptive Support Ventilation. The ventilation system is a touchscreen display that can show real-time data on the patient’s tidal volume, compliance, resistance, SpO2, and pulse rate.
The unit Powers On and completes the Self Test
The unit is in Excellent Condition.
Our team of product experts ensures that each system is in excellent condition and functioning properly
Contact us today to learn more and get a personalized estimate for your needs.
Don't hesitate to ask any questions - we are here to help you make the most informed decision for your medical practice.
The Unit Includes the following:
The Evita XL offers mask ventilation with NIV plus, which in many cases reduces the need for intubation. When intubation is necessary, the ventilator’s integrated CO2 monitoring helps caregivers ensure correct placem
The Unit Includes the following:
The Evita XL offers mask ventilation with NIV plus, which in many cases reduces the need for intubation. When intubation is necessary, the ventilator’s integrated CO2 monitoring helps caregivers ensure correct placement and metabolic stability. Select workflow support functions, including routine O2 suction or automatic P0.1 measurement, can also simplify clinical routines. A unique trolley system allows staff to easily maneuver the Drager Evita XL throughout the care facility.
Ventilation Modes:
Why Dräger Evita® XL ventilator
The Dräger Evita® XL delivers a comprehensive array of both controlled and assisted ventilation modes. It combines a broad range of performance capabilities with many advanced application functionalities, providing outstanding ventilation therapy and easy-to-use operation encompassing the entire scope of the ventilation process. The Evita® XL helps caregivers find optimal ventilation settings, supports the weaning process, and improves caregiver workflow.
The unit Powers On and completes the Self Test
The unit is in Excellent Condition.
Our team of product experts ensures that each system is in excellent condition and functioning properly
Contact us today to learn more and get a personalized estimate for your needs.
Don't hesitate to ask any questions - we are here to help you make the most informed decision for your medical practice.
The Unit Includes the following:
The VN500 offers mask ventilation with NIV plus, which in many cases reduces the need for intubation. When intubation is necessary, the ventilator’s integrated CO2 monitoring helps caregivers ensure correct placement
The Unit Includes the following:
The VN500 offers mask ventilation with NIV plus, which in many cases reduces the need for intubation. When intubation is necessary, the ventilator’s integrated CO2 monitoring helps caregivers ensure correct placement and metabolic stability. Select workflow support functions, including routine O2 suction or automatic P0.1 measurement, can also simplify clinical routines. A unique trolley system allows staff to easily maneuver the Drager Evita XL throughout the care facility.
Ventilation Modes:
Why Dräger VN500 ventilator
The Dräger VN500 delivers a comprehensive array of both controlled and assisted ventilation modes. It combines a broad range of performance capabilities with many advanced application functionalities, providing outstanding ventilation therapy and easy-to-use operation encompassing the entire scope of the ventilation process. The Evita® XL helps caregivers find optimal ventilation settings, supports the weaning process, and improves caregiver workflow.
The unit Powers On and completes the Self Test
The unit is in Excellent Condition.
Our team of product experts ensures that each system is in excellent condition and functioning properly
Contact us today to learn more and get a personalized estimate for your needs.
Don't hesitate to ask any questions - we are here to help you make the most informed decision for your medical practice.
We use cookies to analyze website traffic and optimize your website experience. By accepting our use of cookies, your data will be aggregated with all other user data.